Product Description

Top grade acid silicone sealant

Feature
The product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in the air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Clear, Grey, White.

Appearance: Exquisite well-proportioned cream, no agglomeration, no gelling, no surface solidify, hard dispersing.  
Specific gravity(G/cm³ ) 0. ***1. 0 
Prolapse Distance (mm) ≤3  
Surface Solidify Time (min) No distortion
Extrude property (ml/min) ≤*0 
Flexibility Recover Rate (%) ≥*0 
Peel Strengthen (Standard)MPa ≥**0 
Fix Extend Adhesive Ability >0. *0
Vertical Aclinic: No damage 

Main Composition
α , &branded; -Dihydroxyl Methyl Silicone

Scope Of Application
This product are widely used for bonding of glass, rubber, wood, pottery, metal and surface of fibred, this product not suitable used under the water, and not suitable for bonding of dope, please finished brushing before construction.

Using Method
1. Clean the surface to get rid of the rust, oil, or any dirty.
2. Stick temporary band to protect the surface after cleaning, and move the band off after applying of the glue.
3. Cut the bottleneck and fix the nozzle on, then, cut the tube along the seam width.
4. Check and rectify the tools immediately after gluing. Soak the sealant glue and material completely and keep the surface to be smooth and well appearance.
5. Keep away of the rain, solvent to get onto the surface before the glue dry totally. The remnants of the glue could be washed off with solvent like acetone, toluol before solidifying. If it is solidified already, scrape off the glue by knife.
6. No permission to move the sealing *8 hours after gluing, for the sealant does not solidify yet. Otherwise, the effect would be less.
7. All above guides are just based on normal situation. We suggest to take a trial before mass application according to different operating environment and material although the product is quite stable and high quality.

Warning
1. It is not preferred for the applying at the air-tight situation. Keep ventilative during the operation as the acetic acid is released due to the chemical reaction.
2. No toxic of product. But be careful not to make the glue get into the eyes or nose. Wash them at once if does.
3. Keep smooth and continuous during applying of the glue onto the sealing surface. The adhesive performance would be not good if the air get in.
4. Tighten the lid at once and take off the extrusion nozzle after gluing to avoid entering of the wet air and causing of the solidifying. Eliminate the remnants around the nozzle.
5. Operate at ***0Centigrade and humidity of ****0%.

Storage And Packing
1. The product is nonflammable. Keep dry and shade during storage. The shelf life is 9 months in room temperature.
2. Packing specification: **0ml/bottle, **0ml/bottle Plastic canister packing.